AutomationDirect’s new SureServo2 system accepts 460 VAC three-phase input voltage and has output power ranging from 400 W to 15 kW. All 12 servo motors, drives, cables and accessories in this series retain the functionality of the existing SureServo2 system, including accepting pulse and direction inputs, analog speed or torque inputs, external encoder signals, and can communicate via EtherNet/IP or Modbus TCP Ethernet. net. These servos can be programmed using the front panel keypad or using free configuration software. A built-in oscilloscope and several auto-tuning modes are also available.
ABB’s CIP Safety FSCS-21 is a compact, stand-alone safety module that connects ABB’s ACS380, ACS580 and ACS880 drives to a safety PLC. The module’s security functionality means that no special parameter settings, software or security passwords are required to securely configure the drive. Users can combine different types and sizes of ABB drives with a CIP safety network. The Common Industrial Protocol (CIP), based on EtherNet/IP, enables secure communication and drive control using a single Ethernet cable without the need for external components. The CIP Safety FSCS-21 has two built-in safe stop functions: Safe Torque Off (STO) and Safe Stop 1 (SS1-t). It also meets mechanical safety requirements up to SIL3/Ple.
The Yaskawa GA800 inverter features a high-resolution multi-language display, setup wizard and data logging, Bluetooth, DriveWizardMobile and DriveWizard Desktop connectivity, no power required for programming via built-in USB port, closed-loop or open-loop vector. control and popular network connection. Function blocks are built into the drive to perform automation tasks that would otherwise require a separate controller, auxiliary control power supply (24V) and Safe Torque Off. The GA800 also has built-in features including a DC choke, a 12-pulse low harmonic version, and a braking transistor. Flange protection provides IP55/UL Type12 protection. It is also RoHS and SIL CL3, PLe, Category 3 compliant.
Beckhoff’s range of scalable AA3000 electric cylinders has been expanded with the new AA3100. These devices are designed to replace hydraulic or pneumatic drives. The AA3100 features ISO 15552 flange dimensions and bolt mounting points on both sides, as well as externally threaded mountings on the end of the spindle shaft to accommodate ball joints, clamping hooks, or other common adapters. The AA3123 and AA313 cylinders are available in two versions with different peak and continuous forces and maximum speeds. Like previous AA3000 series units, these cylinders feature TwinCAT 3 automation software, a safe 24-bit high-resolution multi-turn encoder with single cable technology, a spindle pitch range and an adjustable zero-play holding brake.
AcoposMicro offers dual-axis drive modules for low-power applications. It is designed for stepper and servo motors, with built-in I/O, and has a compact and uniform design for inverter and stepper motor modules. The two-channel version of the system requires an area of less than 50 cm² per axis. In addition to the trigger input, the system has a 24 VDC output. The first voltage model is rated at 80 VDC and can withstand surge voltages up to 95 VDC. The module also has overheat protection; warnings are output via the fieldbus.
Frenic-Ace is a compact drive suitable for most types of industrial applications – from fans and pumps to specialized equipment. Fuji Electric drives can operate from single- and three-phase power supplies up to 460 VAC and can operate at optimal speeds throughout the application, reducing overall power and energy consumption. Frenic-Ace offers advanced integrated features including application power rating, sensorless dynamic torque vectoring, permanent magnet synchronous motor control, dual-channel on-chip RS485 communications, and custom logic.
The FR-E810W is an extension of the Mitsubishi Electric FR-E800 series inverter line. This new inverter improves the safety, energy efficiency and reliability of the FR-E800 inverter and provides additional voltage levels for applications where only 120V power is available. This allows the user to avoid using a 240V inverter with an external step-up transformer. Features of the FR-E800 series include support for CC-Link IE TSN technology, dual Ethernet ports, advanced predictive maintenance and AI-assisted fault diagnosis.
Danfoss’ VLT AutomationDrive EZ FC321 is an AC drive that provides speed control for all induction and permanent magnet motors. The drive is flexible and expandable with plug-and-play options. Safe Torque Off is a standard feature that can be programmed for safe use. Enclosures up to NEMA 4X are available, and all models feature built-in DC chokes and RFI filters to protect the installation by minimizing harmonic distortion and EMI. All drives are tested at full load before leaving the factory.
The Omron Industrial Automation VZAB0P4BAA inverter driver features vector current control, high starting torque and a speed control range of 1:100. The drive is dual-rated for enhanced durability, linear control and low noise technology and is designed to last 10 years. The drive can connect to a variety of fieldbus communication networks, including Modbus, Profibus, CANopen, DeviceNet, LONworks, CompoNet, Ethernet, ML-II, Profinet and EtherCAT. It also has built-in safety features and is CE, UL, cUL and TÜV certified.
To expand the Kinetix 5700 platform, Rockwell Automation is introducing ArmorKinetix distributed servos. These servos feature a simplified architecture that allows them to be installed outside of a cabinet for modularization and reducing control cabinet size, cabling and cooling requirements. Key features include minimal derating, power output up to 5.5 kW, advanced analytics using built-in vibration and temperature sensors, built-in safety technology providing SIL 3, CIP and IP66 certification. The drive platform is available as a distributed servo drive or as an integrated servo drive and motor.
Designed to provide quality control in demanding applications, the MoviAxis servo inverter is a dynamic servo drive that meets the requirements of asynchronous or synchronous servo motors. These inverters have a compact design and a power range from 10 to 187 kW. The inverter also includes additional modules, such as a main module, a motion control module or a 24V switching power supply, which are mechanically and electronically integrated into the servo system. A range of communication and automation options are also available, as well as energy-saving components such as energy storage devices. MoviAxis supports all common sensor systems on motors and rails.
Post time: Oct-08-2024